Multi-Spindle Woodworking CNC Machine

Multi-Spindle Woodworking CNC Machine

Modernization of a multi-spindle woodworking CNC machine, including an upgraded electrical cabinet and wiring, LinuxCNC computer control, independent T3 and T4 Z-axis/spindle assemblies, automatic assembly changeover, tool-length measurement and Z compensation. A customer-requested function was also developed to traverse the toolpath forward and backward while a program is paused. The machine is designed for four spindle assemblies; a four-assembly synchronized configuration was physically assembled and tested during the initial phase. Two 5 kW assemblies are currently used, while two 3 kW assemblies are retained in reserve. The available videos primarily show the T3/T4 two-assembly configuration; no footage of the four-assembly tests was recorded.

CNC · Machine Building · woodworking-machine

IDEA & DESIGN

Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine

Machine Before Control-System Upgrade

The woodworking CNC machine before the control-system modernization, documenting its original configuration.

This stage documents the machine and control equipment before modernization, including the original electrical cabinet, Rich Auto pendant and control module. The photographs record the initial hardware arrangement for comparison with the upgraded electrical and software system.

ASSEMBLY & INTEGRATION

Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine

Electrical Cabinet After Upgrade

The updated electrical cabinet after installation of components and wiring for the modernized control system.

This stage shows the upgraded electrical cabinet, variable-frequency drive parameter setup, and the arrangement of power equipment, control electronics and wiring. The photographs document the inside of the control stand, equipment connections and controller-board indicators after integration.

Result

Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine
Multi-Spindle Woodworking CNC Machine

Woodworking CNC Machine After Modernization

An overall view of the machine after the control-system upgrade and LinuxCNC configuration.

The final stage presents the machine and its LinuxCNC interface, configuration selection, independent T3/T4 operation and synchronized operation with Z tool-length compensation. The gallery combines photographs and videos of startup and homing, automatic spindle-assembly changeover, tool measurement with compensation, and the custom forward/reverse toolpath control for a paused program. The four-assembly configuration was physically tested during the initial phase, but the available videos primarily show operation with T3 and T4.