PROJECTS

Real engineering work.

Machines, electronic products and control systems developed from technical requirements to working results.
projects
$ falmont-edge projects --start
→01
CNC Plasma Cutter
CNC & Machine BuildingCNC Plasma Cutter

A CNC plasma cutting machine developed from the initial mechanical concept to a working system for real workshop operation. The project covered mechanical design, custom Z-axis development, machine assembly, control electronics, communication interfaces, torch height control, software integration, testing, setup and commissioning. The machine was developed around LinuxCNC and QtPlasmaC, with custom electronics used to connect and coordinate the control system with the Jasic CUT 100 plasma source. The project also included several hand-built electronic prototypes for communication, galvanic isolation, torch height control and plasma-source control. The development process moved through CAD, early mechanical prototypes, motion tests, first plasma cutting trials, electrical integration, operator interface development, machine commissioning and later operation in a real workshop environment.

Multi-Spindle Woodworking CNC Machine
CNC · Machine BuildingMulti-Spindle Woodworking CNC Machine

Modernization of a multi-spindle woodworking CNC machine, including an upgraded electrical cabinet and wiring, LinuxCNC computer control, independent T3 and T4 Z-axis/spindle assemblies, automatic assembly changeover, tool-length measurement and Z compensation. A customer-requested function was also developed to traverse the toolpath forward and backward while a program is paused. The machine is designed for four spindle assemblies; a four-assembly synchronized configuration was physically assembled and tested during the initial phase. Two 5 kW assemblies are currently used, while two 3 kW assemblies are retained in reserve. The available videos primarily show the T3/T4 two-assembly configuration; no footage of the four-assembly tests was recorded.

Pump Station Demo
Automation · PLC / HMIPump Station Demo

A simulation-based engineering demonstration of a pump-station control system built around a Siemens S7-1200 CPU 1214C. The TIA Portal V19 project includes analog level scaling and range diagnostics, AUTO and MANUAL modes, level interlocks, pump running-feedback supervision, and timeout-based fault handling. The WinCC Unified HMI provides the main operator screen and a settings interface with numeric-keypad input and value validation. The report records 15 functional test cases with PASS status in S7-PLCSIM V19. Technical documents and the project archive are available for download. A separate Falmont Edge browser demo illustrates the HMI interaction model; it is not a Siemens Runtime instance and is not connected to a physical PLC. No physical pump station or field commissioning is claimed.

Electronics · IntegrationElectronic Queue System

Structural import of an electronic queue system project from the engineering archive. The project page is currently being refined and expanded.

Logical Communication Module
Electronics & EmbeddedLogical Communication Module

A custom electronic module developed as the logical-signal part of the communication system used in the CNC plasma cutter. The module was designed as an engineering prototype, tested and integrated into the working machine.

RS-485 Galvanic Isolation Module
Electronics & EmbeddedRS-485 Galvanic Isolation Module

A separate RS-485 communication and galvanic isolation module developed for the CNC plasma cutter. Its purpose was to electrically isolate control electronics from other signal-side parts of the machine system.

Legacy Torch Height Control
Electronics & EmbeddedLegacy Torch Height Control

An earlier working torch height control solution developed during the CNC plasma cutter project. It was functional and used in the machine before being replaced by a more unified operator-oriented approach.

New Torch Height Control
Electronics & EmbeddedNew Torch Height Control

A new torch height control implementation developed to replace the earlier THC approach with a more convenient machine-integrated solution. It was assembled from available modules and components rather than a factory-produced custom PCB.

Jasic CUT 100 Control Module
Automation & ControlJasic CUT 100 Control Module

Custom control electronics developed to integrate the Jasic CUT 100 plasma source with the CNC plasma cutter control system. The work included prototype electronics, PCB preparation and modification of the original front-panel interface.